8×10 Fireplace Surround & Hearth Tile Calculator
Accurate material requirements for a 10 ft by 8 ft fireplace surround & hearth.
8×10 Fireplace Surround & Hearth Tile Calculator (80 Sq Ft)
Room Dimensions (Up to 4 Areas)
Enter length and width in feet and inches. Divide complex rooms into simple rectangles.
Tile Dimensions (Optional)
Specify tile size in inches to calculate exact tile count and box quantities.
Each tile covers 2.000 sq. ft. (288 sq. in.)
Waste Factor & Pricing
Standard tile projects require extra tiles for perimeter cuts, pattern alignment, and future repairs. Default is 10%.
Base Net Area: 80.00 sq. ft. + 12.00 sq. ft. cutting allowance
Step 1.1 Convert to Inches & Divide by 144:
8×10 Fireplace Surround & Hearth: 10 ft 0 in × 8 ft 0 in = 120" × 96" = 11,520 sq. in. ÷ 144 = 80.0000 sq. ft. (80.00 sq. ft.)
Step 2. Apply Waste Allowance Factor:
80.0000 sq. ft. × (1 + 15%) = 92.0000 sq. ft. to order (+12.0000 sq. ft. waste)
Step 3. Calculate Tile Quantity:
Tile Size: 12" × 24" = 288 sq. in. (2.000 sq. ft. coverage). Required area with 15% waste: 92.0000 sq. ft. ÷ 2.000 sq. ft. = 46.00 → 46 tiles.
Installation & Layout Tips for 8×10 Fireplace Surround & Hearth
- Use heat-resistant tile and flexible high-temperature mortar near firebox opening.
- Corner miters and fireplace edge trims require precision cuts.
Worked Calculation (10 ft × 8 ft)
• Net Area: 80 sq. ft.
• Cutting Waste (15%): +12 sq. ft.
• Total Material to Order: 92 sq. ft.
• Individual Tile Count: ~46 pieces
10 ft × 8 ft = 80 sq. ft. Adding 15% for fireplace surround & hearth perimeter cuts equals 92 sq. ft.
How Tile Square Footage & Quantity Are Calculated
Estimating tile requires three basic mathematical steps: converting room measurements into square feet, adding an essential cutting waste factor, and dividing by each tile's surface coverage.
Convert to Square Feet
(Length" × Width") ÷ 144 = Sq. Ft.
Convert feet and inches to total inches, multiply length by width to get square inches, then divide by 144 (since 1 sq. ft. = 12" × 12" = 144 sq. in.).
Add Waste Factor (10%–15%)
Net Sq. Ft. × (1 + Waste %) = Total
Every installation produces cut remnants around baseboards, toilets, and doorways. A minimum 10% waste buffer prevents running short mid-job.
Determine Tile Count
Total Sq. Ft. ÷ Tile Coverage = Pieces
Divide gross square footage by individual tile coverage (e.g. 12"×24" = 2 sq. ft. per tile). Always round up to the nearest whole tile and box.
Worked Example: Measuring a Bathroom Floor
1. Convert room dimensions to total inches:
- Length: (8 ft × 12) + 7 in = 96 in + 7 in = 103 inches
- Width: (5 ft × 12) + 2 in = 60 in + 2 in = 62 inches
2. Multiply inches and divide by 144 (Net Area):
103 in × 62 in = 6,386 square inches
6,386 sq. in. ÷ 144 = 44.3472 sq. ft. net (displays as 44.35 sq. ft.)
3. Apply 10% waste factor (Gross Area to Order):
44.3472 sq. ft. × 1.10 = 48.7819 sq. ft. to order (displays as 48.78 sq. ft.)
4. Compute tile count & box requirements (12" × 24" tiles):
Each 12" × 24" tile = (12 × 24) ÷ 144 = 2.0 sq. ft. coverage
48.7819 sq. ft. ÷ 2.0 sq. ft. = 24.39 → 25 tiles needed (rounded up)
At 8 tiles per box: 25 ÷ 8 = 3.125 → 4 boxes needed
5. Estimated Material Cost (at $4.80/sq. ft.):
48.7819 sq. ft. × $4.80/sq. ft. = $234.15 (estimated total cost including 10% waste)
How to Measure Rooms Accurately
- Measure at the widest points: Baseboards and framing are rarely perfectly square. Measure both ends of a room and use the larger measurement.
- Break irregular rooms into zones: For L-shaped layouts or rooms with closets, measure each rectangular section separately as Area 1, Area 2, etc.
- Shower walls and wet areas: Measure from the top of the shower pan or tub lip up to your desired finished tile line or ceiling.
- Backsplashes: Measure the length of the countertop and height from counter to upper cabinets (standard is 18 inches). Deduct window openings.
Choosing the Right Waste Allowance
Ideal for straight stack or simple 1/3 offset running bond in square or rectangular rooms.
Essential when laying tile at a 45-degree angle, or in rooms with many jogs, alcoves, and pipes.
Herringbone patterns require angle cuts on all four wall perimeters, producing triangular scrap that cannot be reused.
Trim Pieces, Bullnose & Schluter Jolly Edges
Formula: Linear Inches ÷ Piece Length = Pieces Needed (+10% cut allowance)